| Monolights and Monolight Kits |
|
|
|
Allure DP320 Monolight
The Allure DP320 (810593) by Norman is not just another monolight. This Dual Power 320 watt-second system can be used in studio with standard AC power, and it can be taken on location where it performs equally well using the optional BP320 Battery Power Supply. The included DC Power Cable also allows the DP320 to be used with Quantum Turbo™ and Turbo Z™ Batteries.
In studio, the 100 watt modeling lamp provides enough light for focusing, even when using a softbox or umbrella. The optional R5009 Adapter Ring makes the DP320 compatible with all Norman reflectors, grids, barn doors and other light modifiers.
The control panel allows the power level to be set to full, half or quarter power. It also includes a switch to enable a photo eye for wireless synchronization with another strobe.
|
Includes:
- Lamphead
- 5" Reflector
- Flashtube
- Modeling Lamp
- Protective Cover
- Power Cord
- Sync Cord
- DC Power Supply Cord |
|
DP320 Specifications |
| Flash Power |
320 watt-seconds(AC), 270 watt-seconds (DC) |
| Flash Power Control |
Full, 1/2 and 1/4 |
| Color Temperature |
5500K |
| Guide Number |
110 (with included 5" reflector) |
| Angle of Illumination |
64 degrees (with included 5" reflector) |
| Photo Eye |
Built-in with ON/OFF switch |
| Modeling Lamp |
100W with ON/OFF switch (AC only) |
| AC Power Source |
110-120VAC, 60HZ |
| Housing Dimensions |
4.8" W, 4.8" H, 9.3" D |
| Weight |
3.65 pounds |
|
|
 The Allure BP320 Battery Power Supply
Now your Allure DP320 Monolight can be used anywhere, with the BP320 (811954) Battery Power Supply. Even in the most remote locations you can have professional studio light that is compatible with the entire line of Norman light modifiers.
A fully charged battery will support approximately 115 full power flashes. The built-in level indicator shows battery power status, with a red light to tell you when it needs to be charged again. The optional R4162 Adapter allows the BP320 to be conveniently mounted to a light stand. |
| BP320 Specifications |
 |
Battery Type
Battery Capacity
Charge Requirement
Battery Output
Dimensions
Weight |
Sealed lead acid
12 VDC, 2.3Ah
18VDC, 600MA
305VDC, 500MA
8.7" L, 4.3" W, 1.9" D
3 pounds |
|
|
|
| |
|
|
 |
